Project Type: Power Supply
Color: silver and black
Plug type:; European regulations US regulations British regulations
Bottom diameter: about 7 cm
Height: about 3.4 cm
Package weight: about 450 grams
1-Power 5 buttons for touch sensing, LED digital display voltage range.
2- Each voltage range corresponds to a 7-color backlight, and the color backlight will work (flashing and flashing) during operation.
3-voltage addition and subtraction, each press is 0.1V, the output adjustable voltage range is 1.5-16V, the maximum current is 2.5A
4-Power factory default two-machine output mode. (By setting method, the right jack can output the connection cable/pedal any conversion)
5- Press and hold the plus and left buttons for 3 seconds, the LED display 1-0 is (single output mode), the left jack is connected to the tattoo machine, and the right jack is (normal pedal) interface control.
At the same time, the button pedal switch (master mode) can be used.
6- Press and hold the minus button and the right button for 3 seconds at the same time, the LED display 1-1 is (dual machine output mode), that is, the left and right interfaces can be connected to the tattoo machine. In this state, only the button pedal switch can be used (master mode) ).
Tip: In this dual mode (the output voltage can be set independently, the last set voltage will be retained)
Package list : 1X power supply host, 1X adapter, 1X power plug, 1X user guide